particleIllusion 3.0.4 - Windows 的更新與修補

 

更新

版本:particleIllusion 3.0.4.1 (或 3.0.4a)
 

若是您安裝的版本為3.0.2或3.0.3的話,可以使用自動更新 (AutoUpdate) 功能 -- "Help" 功能表,選擇 "Check for Updates",系統就會自動的更新。

使用自動更新的功能之後,若是您希望更新教學文件,可以下載並安裝 pI3 doc updater for Windows (約 4.88 MB)

從 3.0.x 版更新至 3.0.4a,不使用自動更新功能,請下載 3.0.4a updater (約 5.0 MB)

請注意:若是您更新後無法開啟 pI3 的話 (譬如出現註冊訊息),請從 開始功能表 -> 程式集 -> particleIllusion 3.0 -> Troubleshooting -> reset default setting 選項重置系統。

請注意:若是您從 3.0.1a 更新至 3.0.4a,您必須重新註冊啟用 particleIllusion3 程式 (3.0.2 或 3.0.3 則無須重複此操作),若是您在更新與註冊上有任何需要協助的地方,敬請隨時與我們連絡。


 

particleIllusion 3.0.4 新功能

(從 3.0.3 版的變更)

更新

  • 當 Caps Lock 鍵是啟用中,在開啟 particleIllusion 時啟動對話框 (activation dialog) 會顯示,Scroll Lock 鍵也有相同的作用 (但部分在 Mac 上執行的 Windows 則沒有 Scroll Lock 鍵)
  • 新增編碼程式,支援使用者加入的 alpha channel 為文字的檔案 (alphacodecs.txt)
  • 新增當自動更新 (Auto Update) 無法連接至伺服器時的錯誤處置。
  • 新增加 "use audio from layer" 功能 (在3.0.2時移除),可以讓您在輸出 AVI 時,使用背景的 AVI 檔案的聲音。(該選項僅有在選擇輸出 AVI 時的 Output Option 選項視窗才會出現)
  • 最大的工作區尺寸為 20000 x 20000 像素 (先前的版本限制為 8192 x 8192)。請注意:這是非常大的輸出尺寸,僅能夠工作於 pIllusionRender,並設定為軟體著色 (software rendering) 模式,並且要有足夠的記憶體。
  • 更改預設位置。若是目前的系統使用者,沒有權限可以寫入檔案到 particleIllusion 應用程式的資料夾內,當程式更新或 emitters 這二種型態的檔案,下載至其他的位置。

修正

  • Deleting an emitter from a project file would not remove the unused texure data (so saved project files could be much larger than needed).
  • When first free emitter type was toggled off in hierarchy window, when emitter properties dialog opened all free emitter types in the emitter would use the "disabled" icon, even though they weren't.
  • Deleting a texture or texture group from Emitter Properties Dialog now correctly replaces the deleted texture referenced by an Emitter with a existing texture. (could cause crash before this)
  • Toggling layer icons (bg image visible, objects visible, etc.) will now mark the project as modified (these settings have been saved in the project file all along)
  • Copy and then paste of a disabled Emitter in the Hierarchy now shows the emitter disabled in both Hierarchy and Stage.
  • Corrected issue of not disabling buttons in Auto Update dialog when downloading.
  • Corrected issue where the "Select All"/"Select None" buttons would not reset after a download.
  • Would crash If WMV was picked as the output file type and no profiles were found.
  • If User has no write access to Program Files folder (in a limited account), no library backups were saved. (Will now write them to user "Application Support" folder).
  • Compression controls would not always reset correctly when a new CODEC was picked.

 


 

pIllusionRender 3.0.7 新功能

(installed with particleIllusion 3.0.4)

更新

  • 當 Caps Lock 鍵是啟用中,在開啟 particleIllusion 時啟動對話框 (activation dialog) 會顯示,Scroll Lock鍵也有相同的作用 (但部分在Mac上執行的Windows則沒有Scroll Lock鍵)
  • 新增編碼程式,支援使用者加入的 alpha channel 為文字的檔案 (alphacodecs.txt)
  • 新增加 "use audio from layer" 功能 (在3.0.2時移除),可以讓您在輸出 AVI 時,使用背景的 AVI 檔案的聲音。(該選項僅有在選擇輸出 AVI 時的 Output Option 選項視窗才會出現)

修正

  • Renders that did not start at frame 1 would not be identical to renders that did start at frame 1. (So rendering frames 1-50, then stopping, then rendering frames 51-100 from the same project file would produce a visual discontinuity between frames 50 and 51). Now that this is fixed, rendering pIllusion project files on a render farm is possible.
  • If project file had high quality motion blur option checked (even if "motion blur" option was not checked), then passing the "-blur" parameter on the commandline would use high-quality motion blur instead of regular.
  • When no motion blur is used, saving alpha, and not starting at frame 1, the frame before the first of the sequence is saved but with black RGB channels.
  • Would crash If WMV was picked as the output file type and no profiles were found.
  • If User has no write access to Program Files folder (in a limited account), no preview image or log could be created. (Will now write them to user Application Support folder).
  • Compression controls may not reset correctly when a new CODEC is picked.

 


 

更多關於 particleIllusion 3.0 的訊息

親愛的朋友,我們為您準備了豐富的 particleIllusion 3.0 版產品資訊。若是您希望進一步瞭解 particleIllusion 的功能,請 E-Mail: dgsupport@digivision.com.tw

WonderTouch particleIllusion 總代理:仕冶資訊股份有限公司 DigiVision Corporation